1800MM SERVICE BODY H180185-3D-B
1800mm three-door aluminium service body in black. Gullwing doors both sides, lockable underbody boxes, LED tail lights. Fits most dual-cab utes; choose your model and extras below.
1800MM Service Body H180185-3D-B
The HARIO H180185-3D-B is a 1800mm three-door aluminium service body in black, made to sit on dual-cab utes. Both sides open on full-height gullwing doors, the floor is flat and ribbed, and you choose the extras (trundle drawer, water tank, central locking, fitting and installation) in the options panel below. The price starts at $10,000.
What you get
- Gullwing doors on both sides, held open on gas struts, so you can reach the full length of the body from either side of the ute.
- Third door: a separate lockable door at the front gives a smaller compartment you can open without lifting the main gullwing.
- Lockable T-handle latches on every door.
- Underbody boxes ahead of the rear wheels with drop-down doors for chains, straps and wet gear.
- Flat, ribbed floor that takes a drawer system or a fridge slide.
- Roof channel along the top for mounting a HARIO roof rack.
- LED tail lights and mud flaps fitted.
- Black powder-coated finish.
Options you can add
- Trundle drawer: 1000mm, 1500mm or 1700mm, fitted in the factory.
- Undertray water tank: 65L or 100L. You can also pair a 1000mm drawer with the 65L tank.
- Central locking: two-lock upgrade, with or without wiring to the ute.
- Fitting kit: free with every service body. Bracket versions are available to relocate reverse sensors, reverse cameras and blind-spot (BLIS) sensors.
- Installation at our Hallam factory: tub removal, fitting and light wiring, with or without sensor, camera and BLIS relocation.
Which utes it fits
Dual-cab Toyota Hilux, Toyota LandCruiser 79, Ford Ranger (including Next Gen and Super Duty), Isuzu D-Max, Mitsubishi Triton, Volkswagen Amarok, Mazda BT-50, Nissan Navara, Holden Colorado, LDV T60 and GWM Cannon. Pick your model in the options panel. On the LandCruiser 79 and the Ranger Super Duty the dimensions change to suit the vehicle, as shown in the model list.
Collection, delivery and warranty
Service bodies are collected from our factory at 1/51-53 Hallam South Rd, Hallam VIC, or freighted to the depot nearest you. Your shipping cost shows at checkout once you enter a postcode. HARIO builds carry a lifetime structural warranty; see the warranty terms.
Not sure which set-up suits your ute? Call 1300 56 56 11 or email sales@utehario.com.au. We confirm fitment before anything is built or shipped.

Configure & order
Specifications
| SKU | H180185-3D-B |
|---|
Frequently asked questions
How much is the HARIO H180185-3D-B 1800mm service body?
It starts at $10,000. Options such as a trundle drawer, water tank, central locking and factory installation are priced in the options panel, and shipping is calculated at checkout.
Will it fit my ute?
It is made for dual-cab utes: Toyota Hilux, Toyota LandCruiser 79, Ford Ranger (including Next Gen and Super Duty), Isuzu D-Max, Mitsubishi Triton, Volkswagen Amarok, Mazda BT-50, Nissan Navara, Holden Colorado, LDV T60 and GWM Cannon. Select your exact model in the options. If your ute is not listed, call 1300 56 56 11 and we will confirm fitment.
Can you install it for me?
Yes. We can remove the tub, fit the service body and wire the lights at our Hallam factory, and relocate reverse sensors, cameras and blind-spot sensors if your ute has them.
Can I add a drawer or water tank?
Yes. Choose a 1000mm, 1500mm or 1700mm trundle drawer, a 65L or 100L undertray water tank, or a 1000mm drawer with the 65L tank.
What is the difference between the three-door and two-door models?
The two-door models (H180185-2D) have one gullwing door each side. The three-door model (H180185-3D-B) adds a separate front door, so a smaller compartment can be opened on its own.
What warranty do I get?
HARIO builds carry a lifetime structural warranty. Full details are on our warranty terms page.


